Swiffer Wetjet Replacement pad DIY Tutorial

15 Aug

Hello!  So sorry that I have been absent so long!!  It has been a really crazy summer…… Between kids being home all summer,vacations,illness,  and everything in between I have not had a moment to my self   let alone time to blog and create new projects for you.

You might have come across this project already, but  I HAD to share it with you,  As this is a new one to me.  I can’t believe I never thought of this simple idea before.  A Replacement washable Swiffer Wetjet pad!!  I hate the high cost of  the replacement pad.  My kids always want to “help” Mop the floor and I always cringe at the thought of that “help”  They use more liquid and pads that you can ever imagine.  Now I won’t mind if they “help”.  My new favorite LOVE is PINTEREST!!! I’m So addicted!!!  Anyway I saw this idea and wanted to make it with out any cost.  I saw several ideas and came up with this version

check out this post as well !!  How to refill the cleaner bottle

Here is what you will need:

Old hand towel measuring 14″ x21″

Soft side of velcro 42″ in length you will not use the scratchy side

Sewing machine, thread, and measuring tape

Lets get started.

1.   Fold the towel in half so it measures 10.5″ across

 2.  Cut along the folded edge

You will have two pieces, this will make two pads

The directions are for one pad.  You can either complete each pad individually or do both pads at the same time. Just do each step on  both of the two pieces

3.  Fold bottom edge up 4.5″

4.  Fold Top edge down to meet bottom   edge

 5.  Sew around all edges with a zig zag stitch.  You may want to use a jeans needle as this is thick on the edge that already has the finished edge.   You could do a straight stitch on the three finished edges and a zig zag on the unfinished edge.  This is to prevent the edge from unraveling after many washes.

6. next cut your soft side of velcro to the length of the pad.  It should be 10.5″.  You will need two strips per pad.  So   you should cut four 10.5 pieces.

 7.  Measure down 1″ from the top long side.  This is were you are going to place your velcro and pin.

 8.  Measure up from bottom long edge 1″.  Place and pin your soft side of velcro .

9.  Sew using a zig zag stitch all around the velcro.  Making sure that the middle of the  pressure foot is on the edge of the  velcro.  This way you will get a good secure stitch.

 You have completed one pad!!!  I know that was so easy and I can’t believe I didn’t think of it sooner!!  If you just did one pad at a time go back and run through these steps again and you will have two pads!! This is SO much cheaper than the expensive replacement pads.

Remember check back tomorrow to see how to refill the bottle.

Another really good Trick!!

Tags: , , ,

3 Responses to “Swiffer Wetjet Replacement pad DIY Tutorial”

  1. Donna November 8, 2015 at 8:18 am #

    Hi my name is Donna and I just wanted to drop you a quick note here instead of calling you. I discovered your » Swiffer Wetjet Replacement pad DIY Tutorial Simply Sweet By Brandi’s Blog page and noticed you could have a lot more traffic. I have found that the key to running a successful website is making sure the visitors you are getting are interested in your subject matter. There is a company that you can get targeted traffic from and they let you try the service for free for 7 days. I managed to get over 300 targeted visitors to day to my site. Visit them here: http://s.t0m-s.be/2X

  2. Jess December 26, 2018 at 12:16 pm #

    Not sure why I never thought to make my own swiffer pads… thank you for this post! I’m goig to make some.


  1. » How to refill a Swiffer Wetjet cleaner bottle Simply Sweet By Brandi's Blog - August 16, 2012

    […] Wetjet Bottle that holds the cleaner.  If you missed my tutorial for the Wetjet replacement pad click here    So easy and I never have to worry about how much cleaner the kids use  anymore!!  In just a […]

Leave a Reply

Your email address will not be published.